Module parameters:

Module Name: 200W Boost Adjustable Module(Long time working below 100W)
Model: ZS-PD9D
Type: Non-isolated boost module (BOOST)
Input voltage: 8-40V (1. Input voltage is 8-40V, 2. Please input the "8-15V" shorting point on the shorting board below 10V.
Output voltage: 9-60V continuously adjustable
Input current: 20A (MAX)
Static working current: 20mA (12V liters 24V, the higher the output voltage, the static current will increase, if the lower quiescent current can be used to cancel the power indicator)
Output current: The maximum current of 12A (MAX) is the maximum current under certain conditions (measured 12 liters and 16V). The actual output current is not fixed. It is related to the input and output voltage difference and temperature.
Output power: good ventilation and natural heat dissipation power within 100W, the maximum heat dissipation can reach 200W. If you work for a long time, please keep the balance and pay attention to the temperature rise and heat dissipation.
Working temperature: -40~+85 degrees
Working frequency: 110KHz
Conversion efficiency: up to 96% (efficiency is related to input and output voltage difference, output current)
Short circuit protection: 20A fuse
Wiring method: high current terminal, no soldering, IN+ is input positive, IN- is input negative, OUT+ is output positive, OUT- is output negative
Aluminum case size: 70MM*39MM*31MM
Weight: about 68g

About this module:

1. This power module is a DC boost power supply. The voltage can only rise and fall, and the output voltage should always be greater than or equal to the input voltage. Ensure that the input power is greater than the output power (the principle of energy conservation).
2. The maximum current marked by this boost module is measured at the input 12V output of 16V. When the input voltage and power are constant, the higher the output voltage, the smaller the current will be. The larger the voltage difference between the input and output is, the larger the module is. The lower the efficiency, the greater the heat generation, so it is better to control the differential voltage in the output voltage to be 2-3 times the input voltage.
3. This module dissipates heat through the casing. Under normal circumstances, the natural heat dissipation power is about 100W-120W (measured up to 12V when inputting), so it is normal for the casing to have a certain amount of heat. If you need more power, please strengthen the heat dissipation. Up to 200W.
4.  The power of the web page has 300W 600W, etc. Because of the power=voltage* current, they use the input high voltage to indicate the high voltage input, the power is increased, such as the voltage 40V* the current 10A power is 400W, because When the power is large, the heat is actually very large. Can we really achieve a big question mark? We have not done this test. Interested friends can test it ourselves.

Package includes:

• 1 pcs * DC-DC adjustable boost module 100W